LITHIUM SERIES® II ELECTRIC TORQUE TOOL USER INTERFACE GUIDE
41
The Tool can be set to one of five operating access levels:
The tool is shipped set to the L4 Admin level by default, so that the initial user has the ability to set up security passwords.
The current Access Level of the tool is always displayed on the Home Screen in the center box at the bottom of the screen.
LEVEL 1
Jobs User
The Jobs User (L1) has the lowest administrative privilege. The Jobs User has access only
to the Basic Bolting options and to menu options that allow them to conduct bolting with
preset Jobs. The Jobs User may also export and print Jobs. Default Password: none
LEVEL 2
Flex User
The Flex User level (L2) has access to those Flex User options as configured by the Admin
from a list of options. The Flex User may execute preset Jobs or may create and export or
print Jobs. Default Password: FLEX
LEVEL 3
FUll User
The Full User (L3) has access to the same functions as an Admin (L4) except the Full User
cannot configure Flex Options or set passwords. Default Password: FULL
LEVEL 4
Admin
The Admin (L4) is the highest customer-accessible access level. An Admin-level user
is typically the tool owner, supervisor, production manager or storeroom administrator
responsible for assigning access to menu options. The L4 Admin is the only user able to
configure Flex User options and Shortcut Menu options and to change passwords.
Default Password: ADMIN
LEVEL 5
Service Level
An additional access level is provided primarily for HYTORC authorized service personnel
for tool setup and maintenance. One Service-level function on the Admin Menu – Tool
Calibration – is available to the Admin (L4) access.
ACCESS LEVELS
(CONT ’ D.)
