19
CONVENTIONAL TORQUE LOOSENING
•
The Tool provides the maximum torque capacity in reverse providing a powerful breakout capability
•
Press the directional switch to toggle to the loosen mode
•
When using conventional torque install a back wrench to keep the back nut from turning
•
Position the tool over the nut
•
Position the reaction arm against a firm surface
•
Pull and hold the trigger and any button on the rear panel to apply torque to loosen the nut
•
Once the tool starts the reaction arm will move and firmly press against the reaction surface. The tool will then
begin applying torque to loosen the nut.
•
The status light turn amber during operation. If the operation is successful, the status light will turn green, if
unsuccessful the status light will turn red.
•
Remove the tool driver from the nut
(CONT ’ D.)
