9
INSPECT TOOLS AND CALIBRATION
•
Inspect all components. If damaged report any sign of
damage and do not use the tool
•
Inspect the tool before each use. Repair or replace
any obviously worn or damaged parts.
•
Maintenance must be performed by a qualified
technician
•
Modifying any of the components invalidates the
warranty
•
Check the calibration date on the tool. HYTORC
recommends tool recalibration annually
•
If more than a year has passed since last calibration,
contact HYTORC for recalibration
•
When not in use, store all tool components in the
plastic storage case
•
Save all instructions and calibration reports in the
storage case
ENVIRONMENTAL CONSIDERATION
The LITHIUM SERIES II Tool is a rugged industrial tool
with an electric motor and electronic control. Adhere to
the following guidelines to maintain reliable long term
operation.
•
The tool will withstand light splashing but do not
submerge or subject to continuous rain or extreme
humidity
•
The operating temperature range of the tool is
-4°F (–20°C) to 140°F (60°C)
•
All Cooling Vents should be kept clear of dust, dirt
and debris to allow internal fans to maintain airflow
to keep the motor and electronics within temperature
limits. Do not subject the tool to extreme dust
environments that would clog the vents or do not
cover the vents with your hand.
•
The tool and electronic components are not certified
or approved for explosive environments or areas
containing combustible chemical materials
Cooling Vents
5. CARE AND HANDLING
