15
CHANGE DIRECTION
To change the drive direction, depress the direction sliding switch on the side of the tool and the screen will change to
reflect the opposite direction. The directional rotational arrows at the center of the screen will also be reversed in direction.
LOOSEN
Changing direction sets the tool into the loosen mode with the torque value set to the maximum capability of the tool in
order to quickly loosen or break out nuts. The loosen value can be decreased from the maximum torque value by pressing
the right button corresponding to the down
arrow. The loosen value can be adjusted to the desired value using the left
and right buttons.
Depress switch
on right to
tighten (Torque).
Depress switch
on left to loosen.
The LITHIUM SERIES® II tool drive rotates with either right hand (clockwise) or left hand (counter clockwise) operations.
The tool is nominally set to right hand drive which is most common but can easily be swiched to left hand drive.
The example shows the change in direction for right hand (RH) fasteners. The directional control switch automatically
sets the appropriate direction for left hand fasteners, HYTORC Washers and for the HYTORC Nut as well.
11. CHANGE DIRECTION
