17
INSTALL REACTION ARM
INSTALL SOCKET
The LITHIUM SERIES® II Tool is configured for conventional torque by installing sockets and reaction arms.
WARNING
Failure to make sure the reaction arm is in direct contact with an immovable object
before fastening could result in serious injury. Make sure that no part of your body is in
the path of the reaction arm when the nut is tightened to avoid injury.
•
Slide the reaction arm over the
drive while aligning the screw
with the flat on the spline
•
Tighten the set screw to firmly
attach the reaction arm
•
Challenge the reaction arm to
make sure it is firmly secured
•
Never modify a reaction arm as
this may lead to personal injury
or damage to the tool
•
Make sure the O-ring is installed
on the socket. Insert the pin part
way into the socket.
•
Slide socket on the drive while
aligning the pin hole in the socket
with the hole in the square drive
•
Push the pin through socket and
square drive and seat the pin
flush against the socket
•
Slide O-ring to retain the pin in
place
13. BOLTING WITH SOCKET AND REACTION ARM
