Hypertherm Powermax 65, Service Manual

Page: 28 / 248

SpecificationS
1-12
powermax
65/85 Service Manual
Powermax65 cutting specifications
Handheld cut capacity (material thickness)
Recommended cut capacity at 20 ipm (500 mm/min)* 3/4 in (19 mm)
Recommended cut capacity at 10 ipm (250 mm/min)* 1 in (25 mm)
Severance capacity at 5 ipm (125 mm/min)* 1-1/4 in (32 mm)
Pierce capacity (material thickness)
Pierce capacity for handheld cutting, or mechanized
cutting with torch height control
5/8 in (16 mm)
Pierce capacity for mechanized cutting without torch
height control
1/2 in (12 mm)
Maximum cut speed ** (mild steel)
1/4 in (6 mm) 145 ipm (4000 mm/min)
1/2 in (12 mm) 50 ipm (1400 mm/min)
3/4 in (19 mm) 24 ipm (600 mm/min)
1 in (25 mm) 12 ipm (320 mm/min)
Gouging capacity
Metal removal rate on mild steel 10.7 lbs/hr (4.8 kg/hr)
Duramax series torch weights (refer to 1-5 Component weights )
Duty cycle and voltage information (refer to 1-6 Powermax65 power supply ratings )
* Cut capacity speeds are not necessarily maximum speeds. They are the speeds that must be achieved to be rated
at that thickness.
** Maximum cut speeds are the results of Hypertherm’s laboratory testing. Actual cutting speeds may vary based
on different cutting applications.