Hypertherm DynaMAX 550P, Operator'S Manual

Page: 48 / 224

Operation
3
48 811390 Operator Manual DynaMAX550P/560P/575P Waterjet Pump
Use the controls
Operation panel
The operation panel turns the control circuit in the pump on and off and controls local and remote
pump operation.
2
1
3
4
1 L
OCAL
-
REMOTE
key switch
When the key switch is in the L
OCAL
position, use the operator interface to
operate the pump.
When the key switch is in the R
EMOTE
position:
• Use the remote source, such as a
computer numerical control (CNC)
operator console, to control the
pump.
• Most of the functions on the operator
interface are not available.
Refer to Operate the pump remotely on page 58.
2 C
ONTROLS ON
button
Push this button to turn
ON
the control circuit in
the pump. The button lights when the control
circuit is on.
3 E
MERGENCY STOP
button
When this button is pushed:
• The control circuit turns off, which turns off
the pump, the primary motor, and the
intensifier.
• The bleed-down valve opens to release
high-pressure water from the system.
Refer to Emergency stop on page 60.
4 R
EMOTE
indicator light
When the L
OCAL
-
REMOTE
key switch is in the
R
EMOTE
position, this indicator light is on.