Print Server Administration User’s Guide
EtherP Admin Administration
47
7.
Optionally, add another printcap entry (and issue another
lpc start
command)
for a second printer, using the
port
_TEXT
port. This second printer name can
be used for printing text files.
Entries in
/etc/printcap
begin with a name for the printer or a list of names, separated
by | (a vertical bar). The entries used above are:
♦
lp=
The
lp
entry is used to specify a local printer device. Since the printer is a
remote printer, this entry should be blank.
♦
sd=
dir
The location of the printer’s local spool directory.
♦
mx#
blocks
The limit for print job files in the local spool directory; 0 means no
limit.
♦
rm=
address
The host where the remote printer is located, in this case the
HyperNet Fastprint print server.
♦
rp=
printer
The name of the printer on the remote host. For the HyperNet
Fastprint print server, the port name should be used.
Note:
this entry is case-
sensitive.
Printing from SCO Unix System V/386
To allow printing to a printer attached to your HyperNet Fastprint network print
server from a SCO Unix System V/386 host,
1.
Login as the superuser (root).
2.
Add an entry for the print server in the host’s
/etc/hosts
file, giving a hostname
for the print server’s IP address. A line in
/etc/hosts
contains an IP address and
one or more aliases for the host. For example:
202.39.74.40
ps-142634 ps-142634.dlink.com.tw
If you use DNS (the Domain Naming Services protocol), you can add an address
record entry to your DNS database for the print server.
3.
Change to the
/dev
directory, and issue the command
mkdev rlp
4.
The script will ask:
Do you want to install or delete remote printing (i/d/q)?
Answer
i
and press Enter to continue.
5.
The script will ask:
Do you want to change the remote printer description file /etc/printcap(y/n)?
Answer
y
and press Enter to continue.
6.
The script will ask:
Please enter the printer name (q to quit):
Summary of Contents for FastPrint Multiprotocol Ethernet/Fast Ethernet Print Server
Page 6: ......
