Print Server Administration User’s Guide
EtherP Admin Administration
41
Setting up the Print Server for AppleTalk Printing
To set up your print server so that it can be used for AppleTalk printing:
1.
Make sure the AppleTalk protocol is enabled. The AppleTalk check box in
the Server Device Configuration window needs to be checked. Select the print
server and choose
Server Device...
from the
Configuration
menu to display
this window.
2.
Choose
AppleTalk Protocol...
from the
Configuration
menu.
3.
If your AppleTalk network is divided into
AppleTalk zones
, you will have to
specify which zone the print server should be in. You should locate the print
server in the same zone as most of the users who will be using it.
If your network is not divided into zones, the AppleTalk Zone field should
contain a single asterisk “
*
”.
4.
For each printer port that will be used for AppleTalk printing, you may need to
change the AppleTalk port setttings. Press the appropriate Port Setting button
to open the AppleTalk Port Configuration dialog window.
EtherP Admin
will display the port’s Chooser Name (which is the same as the
port name) and allow you to change the port’s settings:
Summary of Contents for FastPrint Multiprotocol Ethernet/Fast Ethernet Print Server
Page 6: ......
