Print Server Administration User’s Guide
EtherP Admin Administration
5
2.
If you are using Windows 3.1
x
or Windows NT 3.51, choose
Run…
from the
Program Manager’s
File
menu. Under Windows 95/Windows NT 4.x or later
Windows-based operating systems, choose
Run…
from the
Start
menu on the
taskbar. When the dialog box appears, type the pathname of the Setup
program on the floppy drive (
A:\SETUP
or
B:\SETUP
) and click OK.
3.
The Setup program will begin by copying some files and ask for your
confirmation. Click the
Next >
button to continue.
4.
The Setup program will then ask you to select a directory on your hard disk where
you want it to install the
EtherP Admin
program. If you want a destination
directory path other than the one shown, click the
Browse...
button to select it.
Click the
Next >
button to continue the installation.
5.
The setup program will copy
EtherP Admin
program files to the directory you
selected, as well as create an EtherP Admin program group. Press the
Finish
button to complete the installation.
Once the installation is complete, you can begin using
EtherP Admin
.
Starting EtherP Admin
If you are using Windows 95 or Windows NT 4.0 (or a later version of Windows), to
start the
EtherP Admin
program:
1.
Press the
Start
button in the taskbar.
2.
Within the Programs menu, select EtherP Admin.
3.
Select the EtherP Admin program.
For Windows 3.1, Windows for Workgroups 3.1x, or Windows NT 3.51,
1.
In the Program Manager, double-click on the EtherP Admin program group
icon to open it.
2.
Double-click the
EtherP Admin
program icon.
The
EtherP Admin
program will then be ready for use. A sample EtherP Admin
display is shown below:
Summary of Contents for FastPrint Multiprotocol Ethernet/Fast Ethernet Print Server
Page 6: ......
