19
The odometer registers the total distance
that the ATV has been ridden.
The trip meter is resettable odometer.
The clock indicates 24-hour mode.
To change the display, push the switch
⑧
for 0.6 ~ 1 seconds while the display
indicates the odometer, trip meter or clock
you want to change.
Follow the procedure below to adjust the
clock.
1. Push the switch
⑨
(in the clock mode) for
0.6 ~ 1 seconds until the hour display blink.
It is the hour reset mode.
2. Adjust the hour display by pushing the
switch
⑧
(in the hour reset mode) for
0.6 ~ 1 seconds.
3. Push the switch
⑨
(in the hour reset
mode) for 0.6 ~ 1 seconds until the
minutes display blink.
It is the minutes reset mode.
4. Adjust the minutes display by pushing
the switch
⑧
(in the minutes reset mode)
for 0.6 ~ 1 seconds.
5. Push the switch
⑨
(in the minutes reset
mode) 0.6 ~ 1 seconds to resume in the
clock mode.
To reset the trip meter to zero, push the
switch
⑨
(in the trip meter mode) for 0.6 ~
1 seconds.
Odometer
Trip meter
Clock
Operating the display while riding can
be hazardous. Removing a hand from
the handlebar can reduce your ability
to control the ATV.
Always keep both hands on the
handlebar while riding.
WARNING
Summary of Contents for TE450 -
