HYOSUNG TE450 -, Manual

Page: 88 / 100

88
Performing the spark test improperly
can be hazardous.
You could get a high voltage electrical
shock if you are not familiar with this
procedure.
Do not perform this check if you are
not familiar with the procedure.
Do not point the spark plug near the
spark plug hole during this test. Do
not do this test if you have a heart
condition or wear a pacemaker.
WARNING
★ ★
COMPLAINT : Engine stalls
1. Make sure there is enough fuel in the
fuel tank.
2. Check to see that the spark plug is not
fouled. Remove the plug and clean it.
Replace it, if necessary.
3. Check the idle speed. If necessary,
adjust it using a engine tachometer.
The correct idle speed is 1,300 ~ 1,500
rpm.
3. Put the ignition switch in the “ ” (ON)
position. While holding the spark plug
base firmly against the engine, squeeze
in the clutch lever and push the electric
starter switch. If the ignition system is
operating properly, a blue spark should
jump across the spark plug gap. If there is
no spark, take your ATV to your
Hyosung dealer.
When occur any trouble, the best way
is to consult your Hyosung dealer for
repairs.
CAUTION
◉ ◉
IGNITION SYSTEM CHECK
1. Remove the fuel tank.
2. Remove the spark plug and reattach it to
the spark plug lead.