71
2. After thoroughly washing the chain and
allowing it to dry, then lubricate the links
with Hyosung chain lube or an
equivalent.
Some drive chain lubricants contain
solvents and additives which could
damage the “O-rings” in your chain.
Your ATV’s chain contains “O-rings”
which can be damaged by the
solvents and additives in some types
of drive chain lubricant.
Use Hyosung chain lube or an
equivalent lubricant that is specifically
intended for use on “O-rings” chains.
CAUTION
Adjust the drive chain slack in the
following manner until it has 30 ~ 40 mm
(1.2 ~ 1.6 in) of slack at the mid point
between the chain buffer and the rear
sprocket.
To adjust the drive chain, follow the
procedure below :
Failure to inspect the drive chain slack
before each use of the ATV could be
hazardous.
Too much chain slack could cause the
chain to come off the sprockets,
resulting in an accident or serious
damage to the ATV.
Inspect the drive chain slack before
each use.
WARNING
◉
◉
DRIVE CHAIN ADJUSTMENT
�
�
�
30 ~ 40 mm
(1.2 ~ 1.6 in)
Summary of Contents for TE450 -
