HYOSUNG COMET 650 FI, Owner'S Manual

Page: 80 / 90

79
Use a garden hose at low pressure to
remove the majority of dirt or other debris.
Hand wash your motorcycle with a mild
soap or detergent and water. Try to thor-
oughly remove all dirt and debris without
excessive water pressure. Cloth rags,
washing mitts or cleaning brushes can be
used, be careful with brushes as they may
scratch plastic or painted surfaces. Rinse
the motorcycle thoroughly with clean water.
Dry all areas using a chamois or soft
absorbent cloth.
◉ ◉
INSPECTION AFTER CLEANING
Remove the rags or wrapping from the
exhaust pipe. For extended life of your
motorcycle, lubricate according to
“GENERAL LUBRICATION ” section.
Follow the procedures in the “INSPEC-
TION BEFORE RIDING” section to check
your motorcycle for any problems that may
have arisen during your last ride.
Operating motorcycle with wet brakes
can be hazardous.
Wet brakes may not provide as much
stopping power as dry brakes. This
could lead to an accident.
Test your brakes after washing motor-
cycle, while riding at slow speed. If nec-
essary, apply brakes several times to let
friction dry out the pads.
WARNING
◉ ◉
WASHING YOUR motorcycle
With some care, your motorcycle can be
washed in a similar manner to washing an
automobile.
Do not use parts cleaner to throttle body
and fuel injection sensors.
CAUTION
N O T E
Avoid spraying or allowing water to flow
over the following places :
● ●
Ignition switch
● ●
Fuel injection system
● ●
Brake master cylinders
● ●
Rediator fins
● ●
Snorkel air intake for air cleaner
● ●
Spark plug
● ●
Fuel tank cap
Comet650 2008.7.11 3:40 PM ˘ ` 79 JINSUN 300DPI 100LPI T