HYOSUNG COMET 650 FI, Owner'S Manual

Page: 40 / 90

39
Tighten Torque
When adjusting the footrest position,
the 6mm hexagon bolts be torqued to
the proper specification.
If they are not, the footrest can come off
unexpectedly.
WARNING
『 』
&
『 』
are delivered from the factory on position
�
.
Footrest mounting
bolt
2.2 ~ 3.5 kgf
∙
m
(22 ~ 35 N
∙
m)
are equipped with the
side stand ignition interlock system.
If the transmission is in neutral or side stand
up, you can only start the engine with pulling
the clutch lever.
This side stand ignition interlock system pre-
vents the motorcycle from being started with
side stand down.
SIDE STAND
◉ ◉
GEARSHIFT LINK ROD
(FOR
『 『 』 』
&
『 『 』 』
’s OPTIONAL
PARTS)
When the footrests in position � ,
exchange the gearshift link rod for appropri-
ate riding position.
● ●
Position
� �
or
� �
: Install the gearshift link rod ③
● ●
Position
� �
: Install the gearshift link rod ④
The gearshift link rod ④ is optional parts.
�
�
[Optional parts]
Comet650 2008.7.11 3:40 PM ˘ ` 39 JINSUN 300DPI 100LPI T