HYOSUNG Aquil GV650, Service Manual

Page: 86 / 222

3-43 ENGINE
◉
OIL PUMP
●
Before installing the oil pump, apply the engine oil to
the contact face of case, outer rotor, inner rotor and
shaft.
●
Apply a small quantity THREAD LOCK
“
1324
”
to the
oil pump securing screws.
●
Tighten the oil pump securing screws.
● Install the oil pump shim and pin.
THREAD LOCK
“
1324
”
● Put in the oil pump driven gear, and install the circlip.
CAUTION
After the cam driven gear, cam guide, gearshift
shaft and neutral cam stopper have been fitted,
confirm that gear change is normal while turning
the countshaft and driveshaft. If gear change is
not obtained, it means that assembly of gears or
installation of gear shifting fork is incorrect. In
this case, disassemble and trace the mistake.
CAUTION
When installing the oil pump to the crankcase,
turn the pump gear and check that rotation is
smooth by the hand.
1 1sstt
N N
2 2n nd d
3 3rrd d
4 4tth h
5 5tth h