HYOSUNG Aquil GV650, Service Manual

Page: 161 / 222

Brake fluid specification and classification
(Front brake) : DOT 3 or DOT 4
(Rear brake) : DOT 4
●
When remounting the master cylinder to the handle-
bars, first tighten the clamp bolts for upside as
shown.
◉ MASTER CYLINDER REASSEMBLY
Reassemble the master cylinder in the reverse order
of disassembly.
Pay attention to the following points :
CAUTION
� Wash the master cylider components with new
brake fluid before reassembly.
� When washing the components, use the speci-
fied brake fluid. Never use different types of
fluid or cleaning solvents such as gasoline,
kerosine, etc.
NOTE
When installing the circlip, make sure that the sharp
edge of the circlip faces outside.
WARNING
Bleed air from the brake fluid circuit after assem-
bling master cylinder. (Refer to page 2-19)
CHASSIS 7-16
Up
Master Cylinder
Handlebar
Clearance