HYOSUNG Aquil GV650, Service Manual

Page: 169 / 222

CHASSIS 7-24
▣
OIL SEAL AND DUST SEAL
●
Apply SUPER GREASE
“
A
”
to the new oil seal and
dust seal lips lightly before installing it.
SUPER GREASE
“
A
”
●
Install the oil seal retainer
①
, oil seal
②
, oil seal
stopper ring ③ and dust seal ④ to the outer tube.
▣
OUTER TUBE
●
Install the outer tube to the inner tube.
CAUTION
● ●
When installing the oil seal to outer tube, be
careful not to damage the oil seal lip.
● ● Do not use solvents for washing to prevent oil
seal damage.
● ●
Apply fork oil to the Anti-friction meatal
� �..
● ● Make sure that the oil seal stopper ring ③ ③ has
been fitted securely.
CAUTION
Be careful not to damage the dust seal lip and the
oil seal lip, when installing the outer tube.
▣
INNER ROD/DAMPER ROD
Move the inner rod by hand to examine it for smooth-
ness.
If any abnormal points are found, replace inner
rod/damper rod with a new one.
◉
REASSEMBLY AND REMOUNTING
Reassemble and remount the front fork in the reverse
order of removal and disassembly. Pay attention to the
following points :
▣ DAMPER ROD BOLT
●
Insert the inner rod/damper rod into the inner tube.
●
Install the gasket � to the damper rod bolt � , and
apply THREAD LOCK “ 1324 ” to the damper rod bolt
�
and tighten it to the specified torque.
THREAD LOCK
“
1324
”
Damper rod bolt
: 30~40 N ∙ ∙ m (3.0~4.0 kg ∙ ∙ m)
CAUTION
Use a new gasket to prevent oil leakage.
�
�
�
①
②
③
④