hymer ERIBA Touring 2012, Instruction Manual

Page: 97 / 158

97
Touring - 04/11-1 - englisch (EN) - 2048869 - HYW-0102-09EN
Appliances 9
Switching on:
„
Open the regulator tap on the gas bottle and the gas isolator tap "Refriger-
ator".
„
Set 12 V switch " " (Fig. 85,1) to " ".
„
Set 240 V switch " " (Fig. 85,2) to " ".
„
Press the control knob (Fig. 85,4) to large flame " " and hold it down. Wait
until gas gets into the burner.
„
Press the gas ignition switch (Fig. 85,5) repeatedly until the flame appears
in the inspection glass (bottom left in the refrigerator).
„
Keep control knob (Fig. 85,4) pressed for another 10 to 15 seconds, then
release.
„
Check in the inspection glass (bottom left-hand side in the refrigerator)
whether the flame is visible.
„
If ignition is unsuccessful, repeat the entire procedure.
After the refrigerator has been in operation with maximum gas supply for
24 hours the gas supply can be reduced if the cooling power is sufficient.
Switching off:
„
Set control knob (Fig. 85,4) to "0".
„
Close the gas isolator tap "Refrigerator" and the regulator tap on the gas
bottle.
Electrical operation
The refrigerator can be operated with the following voltages:
z
240 V AC
z
12 V DC
Switching the 240 V
operation on:
„
Set 12 V switch " " (Fig. 85,1) to " ".
„
Set 240 V switch " " (Fig. 85,2) to " I ".
„
Use control knob " " (Fig. 85,3) to adjust refrigerating temperature.
Switching the 240 V
operation off:
„
Turn the control knob to the 0 position and switch off the 240 V switch.
Refrigerator is switched off.
Switching the 12 V
operation on:
„
Set 240 V switch " " (Fig. 85,2) to " ".
„
Set 12 V switch " " (Fig. 85,1) to " I ".
Fig. 85 Operating controls for refriger-
ator
1 Energy selector switch 12 V
2 Energy selector switch 240 V
3 Temperature setting control knob,
240 V operation
4 Temperature setting control knob,
gas operation
5 Gas ignition button
Z
Close the gas isolator tap "Refrigerator" when the refrigerator is operated
electrically.