hymer ERIBA Touring 2012, Instruction Manual

Page: 59 / 158

59
Touring - 04/11-1 - englisch (EN) - 2048869 - HYW-0102-09EN
Living 6
6.10.2 Front seating group Troll
„
Slightly lift the front of the table-top (Fig. 35,3).
„
Release the locking device fitted to the table leg and fold the lower half of
the table leg backwards by 90°.
„
Lift the table-top by approx. 45°, remove it out of the mounting rail and
place to the side.
„
Lay the two seat cushions in position (Fig. 35,2 and Fig. 35,4).
„
Place table-top into the lower holders.
„
Pull out the bedding box extension (Fig. 36,6).
„
Place both seat cushions (Fig. 37,2 and 4) in the centre.
„
Insert the back cushions (Fig. 37,1 and 5) between the seat cushions and
the wall.
„
Place the additional cushions (Fig. 37,8 and 9) on the bedding box exten-
sion.
Fig. 35 Prior to conversion
Fig. 36 During conversion
Fig. 37 After conversion
1 Back cushion
2 Seat cushion
3 Table-top
4 Seat cushion
5 Back cushion
6 Bedding box extension
7 Bedding box
8 Additional cushion, short
9 Additional cushion, long