hymer ERIBA Touring 2012, Instruction Manual

Page: 52 / 158

52
Touring - 04/11-1 - englisch (EN) - 2048869 - HYW-0102-09EN
6 Living
Blind The blind is located in the upper blind box.
Closing:
„
Pull blind at the handle (Fig. 21,2) downwards. If the blind is to be com-
pletely closed, it is suspended into the locking devices (Fig. 21,3) situated
on both sides of the window frame.
Opening:
„
If the blind is completely closed: Press handle (Fig. 21,2) downwards and,
at the same time, tilt it slightly inward. The blind can be taken out of the
locking devices situated on both sides of the window frame.
„
If the blind is in an intermediate position: Pull the handle (Fig. 21,2) slightly
downwards until the locking device releases.
„
Use handle to return blind slowly to its initial position.
Insect screen The insect screen is located in the upper blind box.
Closing:
„
Pull insect screen at the handle (Fig. 21,1) down and hang it into the
locking devices (Fig. 21,3) situated on both sides of the window frame.
Opening:
„
Press handle (Fig. 21,1) downwards and, at the same time, tilt it slightly
inward. The insect screen can be taken out of the locking devices situated
on both sides of the window frame.
„
Use handle to return the insect screen slowly to its initial position.
6.6 Lifting roof
Fig. 21 Hinged window
Z
If necessary, the tensile force of the spring for the blind and insect screen
can be re-adjusted (see chapter 12).
X
The apertures for forced ventilation must always be kept open. Never
cover or block forced ventilations with objects such as e.g. a winter mat.
Keep forced ventilations clear of snow and leaves.
X
When staying in the caravan, always open the lifting roof.
Z
Before closing the lifting roof, always close the ventilation zips.
Z
Ensure that the canvas is not trapped between the lifting roof and the
vehicle roof.
Z
Before commencing the journey, always close the lifting roof.