![background image](http://html1.mh-extra.com/html/hymer/eriba-touring-2012/eriba-touring-2012_instruction-manual_2192958076.webp)
76
Touring - 04/11-1 - englisch (EN) - 2048869 - HYW-0102-09EN
8
Electrical system
8.7.1
240 V connection
Requirements concerning
the 240 V connection
z
The connection cable, the plug connectors at the point of supply and the
plug connector to the vehicle must comply with IEC 60309. The standard
designation for the plug connectors is "CEE blue".
z
Use H07RN-F rubber sheathed cable with a minimum cable cross-section
of 2.5 mm² and a maximum length of 25 m.
z
Earth contact connectors (safety) are not permitted. The interconnection of
CEE/safety adapters is also prohibited.
8.7.2
Connecting the 240 V power supply
The vehicle can be connected to an external 240 V power supply.
Connecting the vehicle:
Check whether the power supply device is suitable regarding connection,
voltage, frequency and current.
Check whether the cables and connections are suitable.
Check the plug connectors and cables for visible damage.
Switch off the safety cut-out (Fig. 57,1) in the fuse box (Fig. 57,2).
Open the cover of the 240 V connection on the vehicle (Fig. 58) and insert
the plug connector. Ensure that the detent of the spring-mounted pivoting
cover is engaged in position.
Plug the connector of the connecting cable into the socket of the power
supply device. Ensure that the detent of the spring-mounted pivoting cover
is engaged in position.
Switch on the safety cut-out in the fuse box.
X
The external 240 V power supply must be protected by fuse with a fault
current protection switch (FI-switches, 30 mA).
X
To prevent overheating, the cable must be fully uncoiled from the cable
reel.
X
In case of doubt or if the 240 V supply is not available or is faulty, contact
the operator of the power supply device.
Z
The 240 V connection in the vehicle is equipped with a fault current protec-
tion switch (FI-switch).
Z
For the connection points on camp sites (camping distributors) fault current
protection switches (FI-switches, 30 mA) are obligatory.
Fig. 57
240 V fuse box with safety cut-
out and FI-switch
Fig. 58
240 V connection on vehicle
Summary of Contents for ERIBA Touring 2012
