HygroMatik WL-ROL 160-1200 Series, Manual

Page: 37 / 76

Page 37
10. Decomissioning
The regular operation of the reverse osmosis
unit is dependent on the continuous produc-
tion of desalinated water.
Even during longer periods of non-use, the
system must be connected to the power sup-
ply, as hygiene regeneration is regularly car-
ried out in standby. Keep the power and
water supply of the system connected.
If the system does not produce any permeate
for more than 10 days, the membrane(s)
must be replaced and rinsed before restart-
ing
(see chapter Initial start-up and rinsing
the membrane).
10.1 Dismantling
Once the RO unit will no longer be used, dis-
mantle (demolish or scrap) it by following the
installation procedures in reverse order.
Dismantling of the unit may only be per-
formed by qualified personnel. Electrical dis-
mantling may only be performed by trained
electricians.
Obey the safety guidelines in section “Safety
Instructions,” especially the guidelines for
disposal.
10.2 Disposal after dismantling
The reverse osmosis unit is made up of metal
parts and plastic parts. In reference to Euro-
pean Union directive 2012/19/EU issued on 4
July 2012 and the related national legislation,
please note that:
The components of the electrical and elec-
tronic devices must not be disposed of as
municipal waste, and therefore the method of
waste separation must be applied. The public
or private waste collection systems defined
by local legislation must be used.
The operator is responsible for the disposal
of unit components as required by law.
WARNING
!
Please note
NOTICE