hyfire HFW-W2W-01, System Configuration Manual

Page: 213 / 302

www.acornfiresecurity.com
SECTION 6 (cont)
ADDING AN EXPANDER MODULE TO A TRANSLATOR MODULE
Open the Wirelex software connecting the computer to the Translator Module RS232 connection using a
standard 9-pin serial cable. At the Main Menu page, select
"File" and "New System".
The System properties sub-window will appear. The system code is a randomly generated
hexadecimal number. This is translated in to decimal at the Translator Module to give a three
digit decimal number in the range 0 - 255. If required, the code and the initial operational
channel can be changed. It is recommended that the default code is used unless there is a
requirement to amend.
NOTE : Only the first two alpha-numerics of the " System Code" can be changed - a code
between 01 and ff must be entered
WCTM Issue 3 Page 110 of 155