Hydrotech 89DF Series, Owner'S Manual, Page: 28 / 52

28
4.
IInstall the holder and the Res Care Solution
5.
Take off the small hole cover on the Brine
Well lid.
6. Take off the cover of the Res care bottle . Insert the
wick, making sure it touches the bottom of the
bottle. Insert the other end of the tube completely
into the hole in the brine well cap. Automatic
feeding will start in a few hours.
Res-Up® Feeder Installation Instructions Round Brine Tank - continued
1. Install the grid and brine well inside the square tank. 3. Mark the location of the holder and drill. 2. Measure 2 inches from the top of the tank beside
the oblong molding.
Install Resup Feeder - Square Brine Tank