Page 5
autocut 5-20l user manual edItIon I 2014-05-23
3.2 Important
the hose cutting machine is designed, manufactured and protected for cutting hydraulic
hoses with the dimensions from 3/16” up to 3/4”. Any other use is excluded by
hydroscand machine ab, who shall be exempt from any liability for damage to people,
property or the machine itself, caused by improper use.
do not leave the cutting machine idle running for longer periods, without cutting anything.
Do not cut solid steel, wood or other unknown material, that can cause damage to
people, property or the machine itself.
4. Machine
4.1 Identification
the information for identifying the machine is found on the plates, located outside of
the cutting machine. this essentially includes:
• Manufacturer
• Serial number
• Year of manufacture
• Voltage (V)
• Hertz (Hz)
• Amperes (A)
• Weigh
NotE !
It is strictly forbidden to remove or damage the plate. should this happend, always
contact an authorized techical service only.
for any information and/or technical explanations regarding the cutting machine, always
indicate:
• Model
• Serial number
• Edition and preparation date of the instruction manual. t
4.2 Description
autocut 5-20l is an automatic cutting machine equipped with a rotating toothed cutting
blade. the machine is operated with a touch screen and the cutting process is controlled
by a plc. as option there is hose dereeler, a conveyor belt and an inductive heating unit
for stainless steel overbraids available. on the backside of the machine there is a connec-
tion for smoke evacuation.
the hose cutting machine must onle be used for hydraulic hoses compatible with the
specifications. Follow the environmental conditions and limitations recommended by
hydroscand machine ab and current health and safety regulations.
NotE !
the descriptions includes the use for which the machine has been designed, built and pro-
tected. any other use or failure to comply with the technical parameters listed below, may
constitute a hazard to people and/or property.
