Page 9
autocut 5-20l user manual edItIon I 2014-05-23
Page 10
autocut 5-20l user manual edItIon I 2014-05-23
Caution!
hose end is hot.
HYDROSCAND MACHINE AB
Kungsvägen 22
Phone: +46 (0)225 - 57 330
S-783 35 Säter
Fax:
+46 (0)225 - 50 108
Sweden
Web:
www.hydroscand-machine.se
MANUAL -E
Page 11
Pull out the lower tool, a spring loaded ball holds
the tool in place.
Turn the two handles to adjust the
clearance between the upper and
lower tool halfs.
Caution!
Hose end is hot.
Loosen the knob and centre the cooling
device around the hose.
3
1. Inductive heating head
2. Turn the knob to adjust the inductive heating
head up and down.
3. Turn the knob to adjust the heating head side to
side. The head should be perfectly centered
around the hose.
2
1
HYDROSCAND MACHINE AB
Kungsvägen 22
Phone: +46 (0)225 - 57 330
S-783 35 Säter
Fax:
+46 (0)225 - 50 108
Sweden
Web:
www.hydroscand-machine.se
MANUAL -E
Page 11
Pull out the lower tool, a spring loaded ball holds
the tool in place.
Turn the two handles to adjust the
clearance between the upper and
lower tool halfs.
Caution!
Hose end is hot.
Loosen the knob and centre the cooling
device around the hose.
3
1. Inductive heating head
2. Turn the knob to adjust the inductive heating
head up and down.
3. Turn the knob to adjust the heating head side to
side. The head should be perfectly centered
around the hose.
2
1
