22
STEP 11: INSTALL HOSE SYSTEM
We recommend using the supplied hose labels when plumbing the air system to ensure the hoses are con-
nected to the correct port on the control unit. Refer to Figures 3 and 4.
Connecting Front Tanks
1.
Run hoses from the Stub Tubes on the front two portside tanks to a tee. Then run a hose from the tee to
the Front Port connection on the Control Unit.
2.
Connect hoses from the Stub Tubes on the front two starboard tanks to a tee. Then run a hose from the
tee to the Front Starboard connection on the control unit.
Connecting Rear Tanks
1.
Connect hoses from the Stub Tubes on the third and fourth rear port tanks together via a tee. Then run a
hose from the tee to another tee connected to the rear Port tank.
2.
Run a hose from the tee on the rear port tank to the Rear Port connection on the Control Unit.
3.
Connect hoses from the Stub Tubes on the third and fourth rear starboard tanks together via a tee. Then
run a hose from the tee to another tee connected to the rear starboard tank.
4.
Run a hose from the tee on the rear starboard tank to the Rear Port connection on the Control Unit.
AUX Tanks
1.
Run a hose from the front AUX tank to one of the AUX Ports on the control unit.
2.
Connect the other AUX tanks to a tee and then run a hose from that tee to the other AUX Port on the con-
trol unit.
Connect front
two Port Tanks
Connect three
rear Port Tanks
Connect front
two Starboard Tanks
Connect three
rear Starboard Tanks
The 25000 uses a 6 valve control with two AUX ports.
The 20000 uses a 5 valve control with one AUX port.
Hose Labels
Part #
Hardware Required
Qty 25k
Qty 20k
2093005
TEE
-
HOSE 1 1/4" BARBED NYLON
7
7
2090907
HOSE CLAMP
34
32
3072517
HOSE
-
RUBBER 1 1/4" id x 100FT. CUT
1
1
3072512
HOSE
-
RUBBER 1 1/4" id x 30FT. CUT
0
1
3072516
HOSE
-
RUBBER 1 1/4" id x 50FT. CUT
1
0