11
STEP 4: ATTACH TANK STRAP ASSEMBLY TO TANK
1.
Roll the tank onto its back for unobstructed access to the top and bottom of the tank, as illustrated below.
2.
Place the completed Tank Strap Assembly into the recesses along the front and top of the tank.
The next procedure must be followed in order to prevent damage to the tank. DO NOT force the
assembly together as this could cause the nylon bushing to damage the tank.
3.
Slide the 1/2 x 13 x
8”
Bottom Hex Bolt through the Bottom Tank Gasket, the loosely assembled tank bracket
from Step 3, and the Top Clamp, as illustrated below.
4.
Tighten the Top
-
Side Bolt Assembly until snug, see right.
5.
Tighten the Bottom
-
Side Bolt Assembly until snug, see right.
6.
Torque the Top
-
Side Brass Nut to specification, drawing the as-
sembly into the recess of the tank.
7.
Torque the Bottom
-
Side Bolt Assembly to specification.
Gasket Underneath Tank
Top
-
Side Bolt
Assembly
Bottom
-
Side Bolt
Assembly
Tank shown on its back
Part #
Hardware Required
Quantity
HH
-
LPL
-
1508
Flat Washer (1/2 x2 OD SS)
6
HH
-
2100
Brass Nyloc Nut (1/2
-
13)
2
HH
-
7901
Bottom Hex Bolt (1/2 x 13 x 8)
2
HH
-
LPL
-
1031
Nylon Bushing HH Tank
2
HH
-
1975
Nut (3/8
-
16)
6
1/2x3x8
”
Bottom Hex Bolt
+ Flat washer
Strap Plate
(Top
-
Side) Brass Nut
Nylon Bushing
(Bottom
-
Side)
1/2”
Hex Nut + Flat Washer
U
-
Bolt
This bolt must be tightened before assembling the underneath tank gasket as instructed in STEP 3.
Part #
Parts Required (Per Tank)
Quantity
HH3000
Tank
1
HH
-
LPL
-
1028
Gasket
-
Underneath Tank
2