HYDRO-RAIN B-hyve Pro HSC-1600-M Installation And Operation Manual Download

Page: 3 / 23

Safety Information

Warning: A circuit breaker or cutoff switch shall be installed in the wiring to isolate the controller

Warning: Date and time on the controller are maintained by a long-life lithium battery. This battery shall be disposed of in accordance with local regulations.

Contents

SYMBOL DEFINITION ....................................................................................................................... 2

FCC AND IC STATEMENT ................................................................................................................. 2

DÉCLARATION DE FCC ET L’IC ..................................................................................................... 2

Safety Information ...................................................................................................................... 3

Welcome to the Hydro-Rain Family ................................................................................................ 6

HSC Controller ................................................................................................................................. 6

Controller Features ..................................................................................................................... 6

B-hyve Pro ....................................................................................................................................... 6

Need Help? ...................................................................................................................................... 6

HSC Hardpoints ............................................................................................................................... 8

Ethernet Connection ............................................................................................................ 8

USB Power Port .................................................................................................................... 8

Display .................................................................................................................................. 8

Buttons ................................................................................................................................. 8

Core terminals ...................................................................................................................... 8

Battery .................................................................................................................................. 8

On/Off Switch ...................................................................................................................... 8

Status LED Lights .................................................................................................................. 8

Cellular Antenna .................................................................................................................. 8

10.

Wi-Fi, Bluetooth, and 900 MHz Antenna ......................................................................... 8

Menu Overview:............................................................................................................................ 10

Transformer .................................................................................................................................. 10

Setup ............................................................................................................................................. 11

Setting Day and Time ................................................................................................................ 11

Programming ............................................................................................................................ 11

Set P/MV Operation .................................................................................................................. 11

Basic Operation ............................................................................................................................. 11

Summary of Contents for B-hyve Pro HSC-1600-M
























Search results

Summary of Contents for B-hyve Pro HSC-1600-M

Reviews:

Related manuals for B-hyve Pro HSC-1600-M

Brands by name

Popular brands

HYDRO-RAIN B-hyve Pro HSC-1600-M, Installation And Operation Manual

Search results

Summary of Contents for B-hyve Pro HSC-1600-M

Reviews:

Related manuals for B-hyve Pro HSC-1600-M

Brands by name

Popular brands