The “DD” should flash until you press up or down to select a number. If the button is held for 3
seconds the days advance by 5-day intervals.
The “YYYY” should flash until you press up or down to select a number. If the button is held for
3 seconds the years advance by 5-minute intervals.
Once you select a number the system will wait 5 seconds before moving back to the Month.
Press enter to select the time and return to the previous screen.
Date Format
If you have connected the HSC, date format is automatically set.
Scroll up or down to select your preferred format. Press enter to select.
•
DD-MM-YYYY
•
MM-DD-YYYY (Default)
•
YYYY-MM-DD
•
YYYY-DD-MM
Units of Measure
If you have connected the HSC, Units of Measure is automatically set.
The default or current selection is flashing or otherwise highlighted You can press up or down
to toggle between Imperial or Metric.
If you press the enter arrow the system will display a message alerting user to selected option.
Press enter to confirm, or an arrow will take you back to Imperial or Metric selection.
Pump and Master Valves (P/MV) Screen
From this series of screens, you can change the PMV settings
Terminal Settings
This screen allows you to define a terminal as a Pump or Master Valve. Changing this setting
adjusts the timing giving pumps time to pressurize or spin down.
Set a station as a Master Valve
From here you can define a station as a Master Valve.
Set NC/NO valve operation
Allows you to define if station is normally closed or normally open. By default, all valves are
considered normally closed. If you have set a valve to normally open this screen can also
change it back to Normally Closed.
