HSC Hardpoints
Physical touchpoints to use the HSC:
1.
Ethernet Connection
Used for a hardwire internet connection
2.
USB Power Port
A charger your phone or tablet.
3.
Display
Shows alerts, current status, upcoming watering events, and remaining runtime
4.
Buttons
Look to the display screen to see what the buttons does. The function of these buttons’ changes based on the
screen you are in, or what the controller is doing.
5.
Core terminals
Connect 2 flow meters, 2 Master Valves or Pump Starts, 2 Weather Sensors, and supply power with one 24VAC
output
6.
Battery
Saves date and time only. Program settings and other data are nonvolatile and do not require battery backup!
Replaceable internal lithium battery located next to the on/off switch. The battery may last the life of the
controller but is easily replaced if necessary. Use a standard CR2032 or equivalent replacement if necessary. Be
sure to place the + side of the battery correctly.
7.
On/Off Switch
Turns the controller on or off. Useful when adding or removing modules or interacting with the Core Terminals.
8.
Status LED Lights
Indicates controller status, Wi-Fi, and Cellular (If installed)
9.
Cellular Antenna
10.
Wi-Fi, Bluetooth, and 900 MHz Antenna
