Setup
When the system first powers on it will run several checks. You may see several messages
on the screen and notice that alerts may activate. This is normal. Once the system checks
have completed you can pair to the HSC and begin the setup process.
Setting Day and Time
During the pairing and setup process the HSC will automatically set the day and time. If the
day or time needs to be adjusted Press Main Menu button and scroll to Setup and select
time or date. Different formats are available in the time and date menus
Programming
To Program, pair the controller your smart device and open your B-hyve Pro app
Set P/MV Operation
Use the B-hvye Pro App or from the Controller:
o
To set valve as a Master Valve press Main Menu and scroll to Pump & Master
Valves
o
Scroll to Set Station as Master Valve and select the station so set as a Master
Valve
o
Valves are set to Normally Closed by Default
o
Press Main Menu and scroll to Pump & Master Valves
o
Go to NC/NO Valve Selection to change vale settings
Basic Operation
Full functionality is available from the B-hyve Pro app or dashboard. A limited feature set is
available at the controller.
Manual Operation
Use the B-hvye Pro App or from the Controller:
From Home screen, press Manual
then scroll to select Stations, Program, or Test.
Stations
: Enter Station number. Enter Run Time to run the items immediately.
Programs
: Select Program number to start immediately. Press fast forward to skip
stations.
Test Program:
Test will run all stations in the controller for the run time entered here.
Press fast forward to skip stations.
Sensor Alarm Bypass
Use the B-hvye Pro App or from the Controller press the play button located on the home
screen to override.
Fault Alarms
Use the B-hvye Pro App
