Mist-n-Go User Manual
www.HydromistUSA.com
11
5.2
Operation Modes
5.2.1
Continuous Misting:
l
Press ON/OFF button to start operation
l
The machine starts and continues operation until the mode is
changed, or powered off.
5.2.2
Intermittent Misting:
l
Press the TIME button to cycle through misting modes, the
machine will start intermittent misting based on the mode
illuminated on the control panel.
Water Inlet shut-off.
l
When the pump is turned on without a water supply, the
pump will run for two minutes and then turn off. The internal
current sensor will shut off the pump and the control panel
lights will flash.
l
Reset the control panel by pressing the ON/OFF button until
the flashing lights turn off.
l
Connect an adequate water inlet supply.
l
After a water supply is connected, press the ON/OFF button
again and the pump will resume operation.
Summary of Contents for F10-04-009
Page 1: ...Misting Pump User Manual ...
