Operation and Maintenance Instruction
General Safety Precautions
HYDAC Filtertechnik GmbH
en
Page 37
BEWA OLF15-60 10bar 3255361-01a en.doc
2005-08-25
1.9 Hazards Posed by Stored Residual Energy
Note that the unit may pose a hazard as the result of residual stored mechanical and
electrical energy. Take the proper precautions when instructing personnel on the use of the
unit. Detailed information is provided in the respective sections of this manual.
1.10 Electrical Hazards
•
Any work involving the power supply may only be done by a properly trained, certified
electrician.
•
Make sure to check the electrical equipment of the unit on a regular basis. Any loose
connections or damaged cables are to be remedied/replaced immediately.
•
If work to live components is required, a second individual is required who can switch off
the unit at the main switch as may prove necessary.
1.11 Instructions to Be Followed in the Event of an Emergency
In the event of an emergency, immediately disconnect the OLF from the
power supply!
1.12 Modifications to the OLF
•
Do not make any modifications (design modifications, extensions) to the OLF without the
prior consent of the manufacturer.
•
Immediately replace any machine components which are not in perfect condition.
•
Only use original (OEM) spare parts and consumables. When using non-OEM
components it cannot be ensured that they have been designed and manufactured so as
to comply with loading and safety requirements.
1.13 Fire Fighting
When fighting a fire make sure to disconnect the unit from the power supply, otherwise an
electrical fire cannot be effectively dealt with.
2
Transportation and Packing
All
O
ff
L
ine
F
ilter units are factory-tested for leakage and proper functioning. They are then
carefully packed for shipment.
The fluid connections are all sealed with plugs to prevent the intrusion of contaminants
during transport. Upon receipt of the unit, check it for any damage during transportation.
The packing/packaging material should be re-used/re-cycled as appropriate for your area.
These Operating and Maintenance Instructions are an integral component of the OLF.
