8 | Performing Maintenance
HYDAC FILTER SYSTEMS GMBH
72 / 88
BeWa MFU-30E 4073898a en-us web
8.4 Checking/cleaning the protective screen
To protect the pump from large contaminant particles there is a
protective screen in the suction port. Clean the strainer regu-
larly.
CAUTION
Sharp-edged metallic chips/metallic particles in the protective
screen
Danger of cuts/eye injuries when reaching in or blowing out
u
Wear protective gloves.
u
Wear eye protection.
NOTICE
Damaged protective screen
The filter unit will be damaged/destroyed
u
Never operate the filter unit with a damaged or defective
protective screen.
If the delivery of the vane pump drops or if the pump's noise
level increases, then check/clean the protective screen.
Compressed air.
1.
Disassemble the protective screen according to Chapter
Removing/installing the protective screen [
2.
Clean the protective screen by washing it out and then
dry it using compressed air.
3.
Check the protective screen for damage.
NOTICE! If the web of the protective screen is dam-
aged, replace it immediately.
ð
The cleaning of the strainer is complete.
1
2
3
4
5
6
7
8
9
A
Summary of Contents for MFU-30E
Page 88: ...www hydac com ...