HDA 5500 for HLB 1000 and CS 1000
- 6 -
6.3 Supply voltage
The supply voltage is connected to terminal X1.
After switching on the supply voltage, the unit displays
HdA
for approximately 2 s. Then the
number of the sensor set as the primary display is shown. After a further 2 s (approx.) the
actual value is displayed.
Important:
Before sensors are connected, the HDA 5500 must be set appropriately.
If there is no input signal, or during the reference phase (up to 2 minutes), then, depending
on the type of signal, the following will be displayed:
•
Starting value of the measuring range - flashing
12..32 VDC
HDA 5500–0–2–
DC
–XXX
(see type code label)
85..265 VAC 50 / 60 Hz
HDA 5500–0–2–
AC
–XXX
(see type code label)
2 s
2 s
