FluidAqua Mobil - FAM 10
FAM Set-up and Connection
HYDAC FILTER SYSTEMS GMBH
en(us)
Page 29 / 72
BEWA FAM10 3102456f en-us 2012-03-13.doc
2012-03-13
FAM Set-up and Connection
CAUTION
Rotary vane vacuum pump
Hazardous to health
►
Always make sure there is sufficient ventilation in
the surrounding area of the FAM.
Air coming out of the rotary vane vacuum pump can contain particles of vacuum
pump oil and/or the fluid.
Depending on the composition of the oil and the composition of the gas, there is a
danger of damage to health if the emergent gas is inhaled over an extended period
of time.
Setting up the FAM
Observe the following points when setting up the FAM:
Place the unit on a horizontal and level surface.
Special mounting is not required.
Lock the immobilization brakes on the wheels to avoid unintended movement of
the unit (mobile version only).
Position the FAM in the immediate vicinity of the tank to be cleaned. Observe
the maximum permitted suction pressure.
Observe the ambient temperature on the type label of the FAM.
Ensure that the main switch is freely accessible at all times.
An area of at least 0.8 m must be kept free for maintenance purposes on both
the left hand and right hand sides of the FAM.
Take care to ensure free access to the control panel and that the control cabinet
can be opened completely.