7 | Operation
HYDAC FILTER SYSTEMS GMBH
62 / 84
BeWa CSI-C-11 4548075 from_V250-V253 en-us web
7.6 Changing the access data for the web interface and
FTP
The access data for the web interface via Ethernet (LAN) and
the FTP access can be set in the menu point Web interface
Settings. The configuration can be done using the web
interface itself (W-LAN and LAN), FluMoS mobile and
FluMoS Professional.
A separate password can be assigned for the Hydac user
names stored in the default settings. To do this, please enter
the new password to be created in the New Password input
field and in the Repeat New Password field for confirmation.
To switch on the authentication, the Use authentication setting
must be selected and confirmed using the OK key. A restart is
not required.
If you would like to change the assigned password, the change
must be approved by entering the current password in the
Current Password field.
If you would like to deactivate the authentication for the web
interface again, enter the current assigned password and
remove the tick for the Use authentication setting.
The assigned password must have at least 5 characters and
must include capital and small letters, numbers and special
characters with the exception of umlauts and special char-
acters &, = and ?
Please note down the password you have created. The
password cannot be deactivated or changed without the
currently valid password. If you forget your password, the
device must be reset to the default settings by the HYDAC
service.
1
2
3
4
5
6
7
8
9
1
0
A
Summary of Contents for CSI-C-11
Page 83: ......
Page 84: ...www hydac com ...