HYDAC FILTER SYSTEMS GMBH
Assembly, installation and commissioning | 5
BeWa CSI-C-11 4548075 from_V250-V253 en-us web
35 / 84
5.3 Commissioning
Parameterize the CSI before operation according to the
following chapter.
5.3.1 Setting the CSI
To integrate the CSI into the network environment, adjust the
default settings such as the IP address, subnet mask, SSID as
well as the communication of the connected sensors, etc. to
your needs / requirements.
5.3.1.1 Setting CSI via FluMoS mobile
To set the CSI using FluMoS mobile, load the app for Android
operating systems from the Google Play Store and install it on
your mobile device.
Then establish a connection to your mobile device via W-LAN.
The CSI logs in with the SSID: HYDAC_AP (default setting).
When the connection is established, you can make all the
required settings in the dialog menu.
5.3.1.2 Setting the CSI via LAN
To set the CSI via the LAN connection, proceed as follows:
ü
The CSI-C-11 is connected to the end device with a LAN
cable.
1.
Enter the IP address of the CSI in the browser of your
end device.
ð
This takes you to the login page.
2.
Log in with the valid access data.
O
You will reach the web interface of the CSI-C-11.
Overview of the default settings [
the defaults settings of the IP address
User name
Hydac
Password
CSI-C-11
Tab. 13: Default settings of the web server
1
2
3
4
5
6
7
8
9
1
0
A
Summary of Contents for CSI-C-11
Page 83: ......
Page 84: ...www hydac com ...