HYDAC FILTER SYSTEMS OXiStop OXS Installation And Maintenance Instructions Manual Download Page 11

Page: 11 / 108

Safety Information

OXiStop OXS

Page 11 / 108

MoWa OXS 3992763e en-us 2018-08-10.docx

2018-08-10

Proper/designated use

Use the unit only for the application described in the following.

The OXS is a tank system with an integrated diaphragm and a hydraulically
driven degassing and dewatering unit.

The integrated diaphragm prevents direct contact with the ambient air. This
effectively "vacuum-packs" the fluid. The OXS can therefore be used in very
dusty and damp environments.

NOTICE

Impermissible operating media

The unit will be destroyed.

►

Use the unit only in conjunction with mineral oils compliant with DIN
51524.

Proper or designated use of the product extends to the following:

•

Maintaining adherence to all the instructions contained in the

operation and maintenance manual.

•

Performing inspection and maintenance work.

Summary of Contents for OXiStop OXS













































































































Search results

Summary of Contents for OXiStop OXS

Reviews:

Related manuals for OXiStop OXS

Brands by name

Popular brands

HYDAC FILTER SYSTEMS OXiStop OXS, Installation And Maintenance Instructions Manual

Search results

Summary of Contents for OXiStop OXS

Reviews:

Related manuals for OXiStop OXS

Brands by name

Popular brands