HYDAC FILTER SYSTEMS CTU 1x3x Series Operating And Maintenance Instructions Manual Download Page 16

Page: 16 / 92

Transporting the CTU

Transporting the CTU

To transport the CTU, proceed as follows:

Empty the CTU completely (both tanks, rinsing liquid and return

filter).

Remove all moveable components sensitive to vibration like the

grating, nozzle, PC, monitor, keyboard, etc. from the CTU.

Move the CTU by pulling or pushing the handle. Never lift the CTU by the

handle.

The CTU is shipped from the factory in a wood box with the corresponding

securing devices. Pack the CTU for further transport in this wood box.

Alternatively, place the CTU on a pallet of sufficient size using a forklift.

Brace the CTU so that the steering rollers are not loaded.

CTU 1x3x Series

en(us)

Page 16 / 92

BeWa CTU1x3x 3631694d en-us 2017-03-13.docx

2017-03-13

Summary of Contents for CTU 1x3x Series





























































































Search results

Summary of Contents for CTU 1x3x Series

Reviews:

Related manuals for CTU 1x3x Series

Brands by name

Popular brands

HYDAC FILTER SYSTEMS CTU 1x3x Series, Operating And Maintenance Instructions Manual

Search results

Summary of Contents for CTU 1x3x Series

Reviews:

Related manuals for CTU 1x3x Series

Brands by name

Popular brands