Hwasung HMK-056, User Manual

Page: 56 / 69

Model Rev. Page
HMK-056 Ver1.01 55
SUB+’1’
[Name]
Choice of rule 1
[Format] ASCII SUB 1
Hex 1A 31h
Decimal 26 49
[Descript] Choose the rule 1 of two rules (rule1 or rule2).
SUB+’2’
[Name]
Choice of rule 2
[Format] ASCII SUB 1
Hex 1A 32h
Decimal 26 50
[Descript] Choose the rule 2 of two rules (rule1 or rule2).
SUB+’W’+nL+nH+kL+kH
[Name]
Writing the rule data
[Format] ASCII SUB W nL nH kL kH
Hex 1A 57h nL nH kL kH
Decimal 26 87 nL nH kL kH
[Range] 0≤nL+nHx256≤448, (0≤nL≤255, 0≤nH≤3)
0≤kL+kHx256≤448, (0≤kL≤255, 0≤kH≤3)
[Descript] It writes 1 from nL+nHx256 to kL+kHx256.
[Caution] If the range is exceed, the data will be ignored.
If the writing is set up, the data is not erased, until you do power off
or you receive the command (the rule clear).
SUB+’C’
[Name]
Rule CLEAR
[Format] ASCII SUB C
Hex 1A 43h
Decimal 26 67
[Descript] It clears all of data (as) zero you choosed.
[Caution] Please use this command, once you do rewrite the rule data.
If you need to speed up the processing, you use the command on/off.
SUB+’O’
[Name]
Rule ON
[Format] ASCII SUB O
Hex 1A 4Fh
Decimal 26 79
[Descript] Once you set up the command, the rull will be printing with the character or font.