Hwasung HMK-056 User Manual Download Page 20

Page: 20 / 69

Model

Rev.

Page

HMK-056

Ver1.01

4) Subsquently, you can then learn the results of the change in the printing paper.

It was changed successfully!

Indicates that the changes get applied without a problem.

The value is invalid, try again!

Displayed when the selected item is invalid or moved to another menu without changing the item.

You may find the configuration results by checking the position of the arrow character (->), after
printing the test page or entering preferences mode, by selecting one of the list

3-8-2) Setting by the memroy switch program

You can set the printer’s fucntions and conditions with the host with the memroy switch utility
program.

※

Caution : All information stored in memory switch will be deleted during the setting and please
reconfigure Code Page and Print Option as well.

1) Start the printer in initial settings mode

※

Operation Methods for starting the initial settings mode

[If you turn on the printer while pressing down on FEED button for 2 seconds or more, the PE

LED and the ERROR LED will light/flash in interchangeably and boot in initial settings mode
(9600 BPS, PARITY NONE, HARDWARE HANDSHAKE)]

> Skip this step when using the USB interface for settings.

2) Run the utility program and after selecting the communication port in use, set the Baudrate to

9600, and click on the Communication Test button.
When succeeding in communication, the Start transmit button will activate.

> When configuring with USB interface, set the Port to USB.

①

②

③

Summary of Contents for HMK-056






































































Search results

Summary of Contents for HMK-056

Reviews:

Related manuals for HMK-056

Brands by name

Popular brands

Hwasung HMK-056, User Manual

Search results

Summary of Contents for HMK-056

Reviews:

Related manuals for HMK-056

Brands by name

Popular brands