33
3. Firmware Update
With the adoption of flash memory, you can easily update the printer program from a PC.
When updating, be sure to read the steps below.
1) Turn the power off and then back on.
2) Make sure that the communication cable is connected with the printer.
(You can shorten the update time by using a USB cable.)
3) Run the provided update program, set the model name and communication port, and perform
the update.
The ERROR LIGHT turns off, and after a few seconds, it flashes rapidly and the update starts.
Never turn off the printer power before the update is completed.
4) When the update complete mark appears, the update is completed.
※ If there is an update error during update, the ERROR
LIGHT blinks slowly. After closing the
update program, check the model and communication cable for abnormalities. After checking that
the values are correct, run the update program again and repeat step 1).
5) After the update is completed, it is automatically reset and becomes available to use.
※ For more information on updating firmware, please check our website or contact the person in
charge.
www.compodis.com
