Hwasung COMPODIS HMK-830 Series Technical Manual Download

Page: 22 / 96

④ Close the cover by pressing it in the direction of the arrow

When closing the cover, be sure to press the middle part of the cover (near the arrow)

to close it. Otherwise, blurring of the print, etc. may occur.

2) Auto Loading Method

① Turn on the Printer‟s Power

Cut the end of the paper straight as shown below with scissors.

If the end of the paper is not cut straight as shown in the example, the paper may not

be inserted properly or a paper jam may occur.

①

When the paper is pushed to the paper detect sensor inside the paper input

port with the cover closed, the printer will start the auto loading, and the paper
is cut after a certain length is fed.

CAUTION

www.compodis.com

Summary of Contents for COMPODIS HMK-830 Series

































































































Search results

Summary of Contents for COMPODIS HMK-830 Series

Reviews:

Related manuals for COMPODIS HMK-830 Series

Brands by name

Popular brands

Hwasung COMPODIS HMK-830 Series, Technical Manual

Search results

Summary of Contents for COMPODIS HMK-830 Series

Reviews:

Related manuals for COMPODIS HMK-830 Series

Brands by name

Popular brands