29
Ⅴ. Printer Function Settings
There are two ways to set the printer's functions such as serial communication conditions,
Ethernet, black mark, etc., which are: a manual setting method in which the printer itself is
changed, and a method using tools such as a memory switch program that connects to a PC. For
the direct communication method through the Window Driver, refer to the separate manual
attached with the setting program on our website.
1. Setting Manually
1) If the power is turned on while holding the FEED button for more than 2 seconds, the ERROR
light turns off and then on and off repeatedly, and the items for which settings can be adjusted
are printed as follows.
2) Item change and specification are determined by the length of time that the FEED button is
pressed.
Pressing the FEED button for less than 1 second will change to the next item. For example, if you
want to adjust the print density, press the FEED button for the less than 1 second 5 times to
change the item to “5. Print Density”.
After that, if you press and hold the FEED button for more than 1 second, the item is specified
[Menu]
1.Baud rate
2.Parity
3.Flow control
4.Hex Dump Mode
5.Print Density
6.Auto Melody
7.Cut Mode
8.Auto Buzzer
9.Print Speed
Select and then Enter...
Enter : Press the feed button once for
more than 1second.
Select: Press the feed button many times
less than 1second as menu number.
Exit : Turn power off then on.
www.compodis.com
