Poseidon 4002
– Manual
HW group
www.HW-group.com
First steps
1) Connecting the cables
Turn the unit upside down and write down its MAC address
that is printed on the label.
Set the switches:
DIP1=Off, DIP2=Off
.
Connect the unit to the Ethernet (with a patch cable to a
switch, cross-over cable to a PC), RJ-45 port.
Plug the power adapter into a mains outlet and connect it to
the Poseidon power jack.
The green
POWER
LED lights up.
If the Ethernet connection works properly, the
LINK
LED lights up after a short while, and then
flashes whenever data is transferred (activity indication).
2) Configuring the IP address
– UDP Config
UDP Config
– root directory of the supplied CD (Windows and Linux versions).
Download from
www.HW-group.com
Software > UDP Config.
Click the icon to launch
UDP Config -
automatically search connected devices.
Device search works in local network only.
Individual units are identified by MAC addresses (label at the bottom side of the unit).
Double-click a MAC address to open a basic device configuration dialog.
Poseidon 4002
Doubleclick
