Poseidon 4002
– Manual
HW group
www.HW-group.com
Product specifications
Ethernet
: RJ45
– 10BASE-T/10 Mbit/s
Communication
: WEB, SNMP, XML, SMTP, DHCP
4 probe inputs:
RJ11 ports for connecting 1-Wire probes (temperature, humidity...)
o
In total you can connect up to 12 probes (using T-Hubs) (
1-Wire and
1-Wire UNI
probes
supported )
6 digital inputs:
Dry contact inputs (volt free)
2 digital outputs:
Relay contact outputs, each output controls a NO and a NC contact
Configuration DIP switches
o
DIP1 = On activates Serial SETUP mode (9600 8N1)
Restores factory defaults when 5x toggled within 5 seconds after power up
o
DIP2 = On prevents changes in the configuration
Device features
o
Alarm
when a preset threshold is exceeded
o
Remote monitoring
of input states and temperature sensors
o
Remote
relay
output control
o
Local relay output control
with Alarm conditions (Local Condition)
Power supply:
+12V / 250 mA
Dimensions:
184 x 44 x 125 [mm] (1U)
LED indicators:
Power, LINK, STATUS, ALARM
