Ares LTE
2
Product information
Safety information
The device complies with regulations and industrial standards in force in the Czech Republic and
the European Union. The device has been tested and is supplied in working order. To keep the de-
vice in this condition, it is necessary to adhere to the following safety and maintenance instructions.
Never remove the device cover if the relay terminals are connected to the electrical network!
Using the device in a manner other than prescribed by the manufacturer may cause its safeguards
to fail!
The power supply outlet or disconnection point must be freely accessible.
The device must not be used in particular under any of the following conditions:
• The device is noticeably damaged
• The device does not function properly
• Unfastened parts can move inside
the device
• The device has been exposed to
moisture or rain
• The device has been serviced by
unauthorized personnel
• The power adapter or power supply cable
are noticeably damaged
• If the device is used in a manner other than
designed for, the protection provided by the
device may fail.
• The local electrical system must include
a power switch or a circuit breaker and
overcurrent protection.
The manufacturer warrants the device only if it is powered by the supplied power adapter or an
approved power supply.
If you have any problems with installing or operating the device, please contact technical support:
HW group s. r. o.
http://www.hw-group.com
E-mail: [email protected]
Phone: +420 222 511 918
Formanská 296
Prague, 149 00
Czech Republic
When contacting technical support, please keep at hand the exact type of your device (at the type plate)
and, if possible, the firmware version (see later in this manual).
Ares LTE family
Ares LTE monitors the readings of connected sensors. When a value reaches the alarm threshold,
the device sends an e-mail or a text message (SMS), or dials specified numbers.
Use the SensDesk portal to configure the Ares LTE, send alarms or display graphs.
Ares LTE products are ready for remote mass deployment using FOTA (Firmware Over The Air).
Summary of Contents for Ares 10 LTE
Page 1: ...Ares 10 12 LTE User manual...
